Mechanical Issues

This is a list of mechanical fixes I did to the game after I received it.

1. Adjust glass lockdown bar screws (lockdown bar was way too loose)
2. Reverse (corrected) two 4 pin molex connectors under playfield (right ramp complete opto connector was plugged into Beast Eyeball lights connector and vice versa). This caused none of the Boney Beast lamps to work, or the right ramp complete opto.
3. Install backglass rubber stripping for vibration dampening
4. Majorly adjust spider kickout ramp flap for proper operation
5. Adjust right ABC lane switch (not registering)
6. Remove C47 and C51 from sound board to get rid of noise
7. Adjust crate prox sensor, not sensitive enough
8. Add 2 missing bolts on bottoms of each triangular playfield black board supports, had to remove a bunch of stuff to get to those.
9. Replaced blown fuse 113 (wondered why some of the G.I. wasn’t working)
10. Replace translite side plastic extrusions (both cracked about 8 inches down the sides)

HOME